Tag Archives: IPv6

AVM Fritz!Box 7490 review

AVM FRITZ!Box 7490Three years ago, I got the AVM Fritz!Box 7390, which has been serving me well over the time. However, with Proximus announcing the deployment of VDSL2 vectoring this year, my trusted Fritz!Box would not be accepted by the incumbent and network operator, despite its proven VDSL2 vectoring compatibility. I was left with the perspective to place one of Proximus’ BBoxes in front of my Fritz!Box. That would have meant two devices for one Internet connection. An ergonomic and ecological nonsense.

Not so anymore. Enter the Fritz!Box 7490. AVM is the first CPE manufacturer that went through the tough process of getting some its devices certified for Proximus’ VDSL2 network. The 7490 is one. The others being the 7360 and the 3490. Whether Proximus’ certification process is justified or not is another debate. Suffice to say that only certified devices are assigned a VDSL2 connection on Proximus’ network. Non-certified ones are downgraded to a low ADSL speed.

If you have been using Fritz!Boxes in the past, this one will look very familiar, both for its external design and its web interface. Hence, rather than restating the obvious you read elsewhere, let’s have a look at what is different.

VDSL2 Vectoring compliance

Up to now, the only certified VDSL2-vectoring friendly or capable modems in Belgium were Proximus’ own BBox-2 and BBox-3 in various incarnations, and their Sagem clones. All seem to have a rather buggy firmware at this time, in addition to being clearly tailored to Proximus’ marketing needs.

As mentioned above, AVM now has two devices certified by Proximus, this one being one of them. This is one of the major reason to buy this device if you do not want to use Proximus’ Trabants and would rather settle for a BMW.

The first time you turn the 7490 on, the setup wizard will ask you which country you are living in and adjust itself to the specificies of the country. The relevant firmware version is downloaded later in the setup process. In the case of Belgium, there is no possibility to upgrade the firmware to a new generic (or beta) version without losing Proximus-compliance. This is rather unfortunate, and especially worrisome in case there would be a major security bug that needs to be fixed rapidly. This is due to Proximus’ lengthy process for certifying new versions. (Note that Proximus’ own BBoxes get updated several times a year.Talk about field level playing)

Other features

In addition to the features already present in the older 7390, some additional ones are worth noting. The 7490 supports Wireless AC with up to 450 Mbit/s in the 2.4 Ghz band and even 1300 Mbit/s in the 5 Ghz band. The latter may come in handy if you live in an area with a lot of (mostly 2.4 Ghz) WIFI networks.

The 7490 also boasts more flash memory for its internal usage than its predecessor. This allows AVM to add additional features to the box with sacrificing others. For example, the latest iteration of the 7390 firmware removed the support for the SMB sharing due to the shortage of flash memory.  No more so with the 7490. AVM has a long tradition to continuously improve its firmware. Do expect new features to be added in the future, firmware certification permitting. See, for example, what is currently being tested in the Beta version.

With all the possibilities of the Fritz!Box 7490 regarding Internet, telephony and home networking, it is hard to think of a missing feature. Nothing being perfect in this world, one such missing feature for the Belgian market would be the so-called “full routing mode”. Right now, the Fritz!Boxes only offer the IPTV signal on two dedicated wired Ethernet connections. It would be helpful to have the IPTV signal available on all connections, including WIFI. According to AVM, this feature is already deployed in other markets, like Luxembourg. However, the relevant information for Belgium is not being provided to them. This is competition, the  Proximus way.

In usage

As can be expected from AVM, the modem is stable. My previous 7390 never required a reboot, except for firmware upgrades. After using the 7490 for a few days, I am confident it will perform flawlessly also. The Fritz!Box has a nice function which allows one to import the settings of another Fritz!Box. This worked nicely. In my case though, the settings related to IPv6 were not recovered (with the 6.04 stock firmware at least). According to AVM, this should be fixed in future versions of the firmware. I also needed to re-register my DECT phones, which makes sense since they were still expecting the former Fritz!Box.

My Internet connection not being upgraded to VDSL vectoring, I could not test its performance in this context. I will update my post if and when it finally happens (Proximus does not currently vectorise the 8d profiles). Regarding the performance in plain VDSL context, I did not notice any change compared to my previous 7390. This was expected.  VDSL performance is mainly dependent on elements outside the device manufacturer’s control: PSTN line length, copper quality, telco policies, etc.
Update 5 Aug 2014:   Proximus has now activated VDSL vectoring in my area. It did not change anything for me, as I am too far from the street cabinet. However, I was not downgraded, which demonstrates that the Fritz!Box is indeed certified by Proximus.

All in all, this Fritz!Box 7490 is worth every Euro. Surely, it may look more expensive that the average ISP-provided modem, but they don’t play in the same league. If you were to add the cost of a basic modem, a good home router, a DECT station and an IP-based PBX, the Fritz!Box is actually cheaper than all those components bought separately, and consumes less electrical power. So, do our planet a favour and prefer an integrated box, with a consistent interface.

Google Analytics for WordPress – IPv6 version

Ahead of the World IPv6 dayAPNIC has launched an useful initiative to collect statistics regarding IPv6 connectivity. If you are interested in testing your clients’ IPv6 capabilities, you can use the APNIC Labs Google Analytics Tracking Code. This allows you to test your customers’ experiences connecting to your website via IPv4, IPv6, and dual-stack. Read more »

Fritz!Box WLAN 7390 review

I finally got a AVM Fritz!Box WLAN 7390 modem/router to replace the Belgacom-provided BBOX-2, which gave me a few headaches and quite some frustration over the past year. I am happy to report that the Fritz works with Belgacom VDSL2, despite what Belgacom says about the mandatory use of their own broken modem.  Let’s get to the real meat. Some background first. Read more »

IGF meeting blacklisted

I just got an e-mail from someone currently attending the IGF meeting in Geneva . The e-mail ended up in my spam folder because the IP address used for the WLAN at the meeting is on a spambot/virusbot blacklist, namely cbl.abuseat.org. Apparently some guy there has his computer infected by a spambot or a virusbot. Because the local host uses a NAT, all the computers share the same public IP address. This means that all the attendees to the meeting risk seeing their e-mails blacklisted somewhere.

Funny this comes from the very people who would like to set up strategies to fight cybercrime …

Lesson to be learned:

One: NATs are a nuisance. They are responsible for collateral damage.

Two: In a hostile networking environment, never ever trust the local network and fire up your ssh or IPsec tunnel to a machine you can trust.

Three: give us IPv6 as soon as possible to get rid of NATs

IPv6 considered a problem by some users

I have a Google Blog Search Alert looking for posts over IPv6 in my RSS reader. What strikes me is the number of posts explaining how to disable IPv6 in Windows Vista, MacOSX, Ubuntu and other flavours of Linux.

It looks like disabling IPv6 makes web browsing faster for a lot of people, independently of which operating system is being used. One guy even wrote in one of his postsIn order to fix this problem” . IPv6 was supposed to be a solution, not a problem.

I can think of several rational explanations for the poor user experience. If the DNS query for a web site first returns a AAAA record and you do not have IPv6 running smoothly, the browser will first time out before trying the IPv4 address. If the IPv6 tunnel broker, gateway, etc is overloaded, you are up for a painful experience, too.

However, it is worrying that people need to disable IPv6 on their computers. If and when there will be IPv6-only web sites, they will not be able to access them.